Ghazzālī; 1058-1111; Ibn Taymīyah, Aḥmad ibn ʻAbd al-Ḥalīm, 1263-1328; criticism and interpretation; Islam; doctrines.

صدر عن المركز العربي للأبحاث ودراسة السياسات كتاب المنطق الإسلامي: حضور المنطق الأرسطي لدى مفكري المشرق الإسلامي، وهو من تأليف محمد بن يعيش. يقع الكتاب في 272 صفحة، شاملةً ببليوغرافيا وفهرسًا عامًّا. أمام ما يعرِّفه مؤلفُ الكتاب بـ "حقيقتين تاريخيتين"؛ هما أوّلًا: كثرة من اشتغلوا بعلم المنطق في الحضارة العربية الإسلامية من أفذاذ العلماء، وانتشارهم في أصقاع البلاد الإسلامية، وتنوّع أديانهم، وأصناف تخصصاتهم العلمية ونتاجاتهم، تأليفًا وحواشيَ مسهبةً وترجماتٍ ومختصراتٍ وشروحًا وأرجوزات، وثانيًا: إقراره بما لقيه هؤلاء العلماء من مضايقات وتجريح (...) واتهامات وملاحقات. يطرح الكتاب إشكاليةَ البحث، المتمثلةَ بالحيثيات التي رافقت استقبال المسلمين علمًا دخيلًا على العلوم الإسلامية كالمنطق وتعاملهم معه، ومراحل تردده بين الرفض والقبول في البيئة الجديدة، وأوجه الجِدّة لدى العلماء الذي ساهموا في تكريسه لغويًّا (الفارابي وابن سينا) ودينيًّا (الغزالي). وقد دفع "الحضور" الأرسطي لدى مناطقة الشرق الإسلامي الكاتبَ إلى تبيان مساهمة أرسطو - ضمن عناصرَ مساهِمة كثيرة - في تكريس خطاب إسلامي عقلاني جديد، وتشكيل المعالم الكبرى والجزئية لفلسفة هؤلاء المناطقة، التي تعبّر برأيه عن "تواصل" بين الفكرين اليوناني والإسلامي بدلًا مما يُحكى عن الانفصال والقطيعة والطلاق البائن، متجنِّبًا الانحياز إلى أحد طرفي الأزمة، المشنِّعين الذين يقذفون المنطق بشتى التهم، كإثارة الشبهات والباطل والرجم بالغيب من جهة، والقائلين بمادية فيلسوف اليونان وعقلانيته في مقابل لاعقلانية المسلمين وظلامية فكرهم، مع تشديده على تميز خطاب مفكري المشرق ضمن تاريخ الفلسفة المرافِق لهذا التواصل. وقد أتاح الجهد البحثي المبذول الانفتاحَ على أفق منطقي غير مدرسي اتبعته مجموعة من مفكري العالم الإسلامي، في محاولة لتكريس نظرة جديدة إلى التراثين اليوناني والإسلامي، متوسِّلًا لبلوغها كثرة الاستشهاد بنصوص المناطقة المشرقيين التي يُستدعى فيها أرسطو وسيلةً لإثبات حقيقة العلاقة بين الخطابين بطريقة علمية أمينة. (shrink)

Graphical AbstractWhereas clathrin-mediated endocytosis (CME) exists in all eukaryotic cells, we first detect classical dynamin in Ichthyosporid, a single-cell, metazoan precursor. Based on a key functional residue in its pleckstrin homology domain, we speculate that the evolution of metazoan dynamin coincided with the specialized need for regulated CME during neurotransmission.

Study on the philosophy of Cārvāka, classical Indian materialist.

This paper addresses the issues related to designing and estimating the strength of solid-alloy elements in the deforming broaches of significant diameter (exceeding 150 mm) for the developed process of discrete broaching. The tool limit condition was assessed based on two strength criteria: the specific potential energy of shape change and the maximum tangent stresses. Numerical modeling using the finite element method has made it possible to derive the distribution of equivalent stresses in the tool elements and the contact stresses (...) at the surface of the contact between a solid-alloy insert and the body, which enabled the analysis of tool strength under loading. The simulation was performed under a single normal load, which ensured the versatility of the calculation for any contact pressure values. We have derived formulae to calculate the acceptable contact pressure depending on unit load. The effect of the insert protrusion height over the body on the strength of tool elements has been established. We have derived engineering dependences that determine the required magnitude of insert protrusion over the body depending on the ultimate load. An example of calculating the strength of a prefabricated deforming element in the machining of a sleeve made from gray modified cast iron of hardness HB230 has been considered. Our calculations have shown that the deforming element designed for the new technological process corresponds to the conditions of strength, provided the ratio h1/h=0.15 is maintained (where h1 is the insert height above the body, h is the insert height). The results obtained could be used in engineering calculations when designing the prefabricated tool for discrete deformation, as well as to assess the strength of prefabricated tools, such as cutters, core drills, reamers, when refining external loads. (shrink)

Adūnīs, 1930-'s Jidhr al-sawsan; criticism and interpretation; Arab poetry; history and criticism.

If we analyze our legislation in detail, we can see that there are so-called “legal scissors”. On the one hand, the law guarantees freedom by equalizing the rights of all citizens of the state, and on the other - leaves believers outside the legal field declaring separation from the church. It should be noted that even the Law on Education does not guarantee the right to receive alternative education for children of believers, regardless of their affiliation with a religious organization, (...) in educational institutions. It should also be noted that even in the years of Ukraine's independence, the issue of granting theological education a proper status that would equate it to secular rights has not yet been resolved. Again, the principle is the separation of the school and the church. Here are some questions. (shrink)

The study of professional ethics has a long tradition in the Soviet Union; medical ethics is a code of conduct as well as an academic discipline. The paper discusses the ethical issues in intensive care, the definition of death, abortion, euthanasia, and the moral aspects of medical mistakes.

Purpose. To determine the potential of deforming broaching for the improvement of efficiency of cutter chisels in the mining industry. Methodology. The study of the application of the technological process of deforming broaching was carried out based on the experimental research into conditions of assembly of press couplings corresponding to cutting rock-destroying tools, the working surface of which is reinforced with solid-alloy inserts. Findings. Based on the conducted research, a new process of assembling the crowns of cutter chisels with the (...) use of deforming broaching was developed. Originality. It was determined that the range of angles of inclination of generatrix of the working cone of the deforming element and the roll-treading lip of the insert, which are necessary for efficient machining and pressing in crowns of cutters, is 4–16°. It was proven that the “solid alloy-steel” press couplings for cutter chisels will have the maximum bearing capacity at total tension a/d0 ≤ 3 %. It was found that it is necessary to foresee the following distribution of tensions: to perform 2 % of deformation by preliminary deforming broaching, and 1 % ‒ by pressing in an insert Practical value. The use of deforming broaching makes it possible to increase the strength of fastening the inserts of cutter chisels by 2 times, to reduce specific consumption of the tool by 4.4 times, and to increase the average drilling rate by 4 times. (shrink)

Islamic philosophy; History; Criticism and interpretaion.

Commentary on Tattvacintāmaṇi of Gaṅgeśa, 13th century, work on Hindu logic and epistemology of the Navya Nyaya school of Hindu philosophy.

Commentary on Tattvacintāmaṇi of Gaṅgeśa, 13th cent., work on Hindu logic and epistemology of the Navya Nyaya school of Hindu philosophy; critical edition.

Morocco; Andalusia (Spain); intellectual life; philosophy; history.

On concept of god in Hinduism and Hindu philosophy.

Study of Sāṅkhyakārikā of Īśvarakr̥ṣṇa, work on the fundamentals of Sankhya philosophy.